Each module has specific feature and intended use:
1. Pulse
Oximeter: - To spot check or monitor Oxygen saturation
of arterial hemoglobin (SpO2%) and pulse rate.
- To analyze the pulse waveform (Photoelectrical Plethysmography
or PP) provided by the oximeter. It only provides mathematical analyses of the input of the SpO2 measurement which estimated
vascular system’s indicators.
2. Heart rate variability (HRV) :
- To analyze the basic rhythms of the NN or RR intervals in heart rate, both in the time domain and
in the frequency domain (short time 5 minutes). It only provides mathematical analyses of the input of the heart rate variability
which estimated ANS (autonomic nervous system)’s indicators .
The mathematical
analysis of Photoelectrical Plethysmography and HRV are not intended use for diagnosis.
The software provides a visual alarm for the values of the heart rate and/or SpO2
percent out of the normal range and for the bad quality signal transmission.
The
data are stored in PC in the Backup system of the ES Teck software.
The device is intended use only for adult subjects (>20 years
old)
This Oximeter
is intended to be used in spot-checking (2 minutes)
The device is intended use in licensed practitioner’s office
This device is no intended to be used at home, in hospital or
out-of-hospital transport
The
device is not intended use in support life and not for continuously monitoring
The system will be use by licensed practitioner.